Magma Structures, a UK-based composites specialists, has delivered three of the world’s tallest carbon composite free-standing masts.

Magma Structures, a UK-based composites specialists, has delivered three of the world’s tallest carbon composite free-standing masts.

The rigs are designed to withstand bending loads of more than 40Mn; more than twice the load on a Boeing Dreamliner wing. The masts were ordered by a German shipyard and are destined for a sailing superyacht.

Built at Magma Structures’ waterside manufacturing facility near Portsmouth, the masts have taken over 3 years to develop, test, design and build using advanced composite manufacturing processes. Over 70 people have worked on the build of the rigs, including an in-house team of specialist composite design engineers.

The rig concept was designed by Dykstra Naval Architects in the Netherlands whilst the load analysis and engineering drawings were compiled by Magma Structures’ in-house engineering design team.

Each mast is able to rotate using systems mounted on ‘wings’ at the side of each of mast. “These rigs are amongst the most technically challenging free-standing carbon composite structures to have been manufactured due to their size, design load requirements and the marine environment in which they will be used,” explains Clive Johnson, managing director of Magma Structures.

“The skills developed and experience gained from building these rigs are already having a direct impact on projects we are developing in other sectors including bridges, stadia and buildings where the benefits of manufacturing in composites can be significant,” he notes.

High performance carbon fibre was used in the manufacturing process of the masts; a similar grade to that used in motorsports and high-end aerospace products.

The masts support a sail area greater than a standard sized football pitch, with full automation in terms of sail deployment, setting and reefing.

The rigs are embedded with fibre optic sensors to give real-time, comprehensive load data on all aspects of the rig as well as safety warnings, historical data, condition monitoring and information to optimise the sailing performance.

Damon Roberts, technical advisor to the project comments: “The high strength, fatigue resistant nature of carbon has been the key in enabling us to develop and manufacture a free-standing structure much larger than anything currently built, including the current generation of wind turbine blades, and with much higher bending loads. The embedded fibre optic monitoring data is invaluable in giving us real-time data to optimise the sailing performance as well as verify the design concepts and give us load case data to minimize the maintenance.”

Magma Structures undertook all the structural engineering design, prototyping, testing, and build of these highly technical rigs and is responsible for commissioning the rigs, controls, sails, automation and monitoring systems.